A home energy audit is the first step to assess how much energy your home consumes and to evaluate what measures you can take to make your home more energy efficient. An audit will show you problems that may, when corrected, save you significant amounts of money over time. During the audit, you can pinpoint where your house is losing energy. Audits also determine the efficiency of your home’s heating and cooling systems. An audit may also show you ways to conserve hot water and electricity. You can perform a simple energy audit yourself, or have a professional energy auditor carry out a more thorough audit.
A professional auditor uses a variety of techniques and equipment to determine the energy efficiency of a structure. Thorough audits often use equipment such as blower doors, which measure the extent of leaks in the building envelope, and infrared cameras, which reveal hard-to-detect areas of air infiltration and missing insulation.
To start you can even conduct a <a rel=”nofollow” onclick=”javascript:pageTracker._trackPageview(‘/outgoing/article_exit_link’);” href=http://www.techstore.ie/Renewable-Energy/Home-Energy-Efficiency/Home-Energy-Audits.htm>home energy audit </a> yourself. With a simple but diligent walk-through, you can spot many problems in any type of house. When auditing your home, keep a checklist of areas you have inspected and problems you found. This list will help you prioritize your energy efficiency upgrades.
Locate Air Leaks
First, make a list of obvious air leaks (drafts). The potential energy savings from reducing drafts in a home may range from 5% to 30% per year, and the home is generally much more comfortable afterward. Check for indoor air leaks, such as gaps along the baseboard or edge of the flooring and at junctures of the walls and ceiling. Check to see if air can flow through these places:
* Electrical outlets
* Switch plates
* Window frames
* Baseboards
* Weather stripping around doors
* Fireplace dampers
* Attic hatches
* Wall- or window-mounted air conditioners.
Also look for gaps around pipes and wires, electrical outlets, foundation seals, and mail slots. Check to see if the caulking and weather stripping are applied properly, leaving no gaps or cracks, and are in good condition.
Inspect windows and doors for air leaks. See if you can rattle them, since movement means possible air leaks. If you can see daylight around a door or window frame, then the door or window leaks. You can usually seal these leaks by caulking or weather stripping them. Check the storm windows to see if they fit and are not broken. If you are having difficulty locating leaks, you may want to conduct a basic building pressurization test:
1. First, close all exterior doors, windows, and fireplace flues.
2. Turn off all combustion appliances such as gas burning furnaces and water heaters.
3. Then turn on all exhaust fans (generally located in the kitchen and bathrooms) or use a large window fan to suck the air out of the rooms.
This test increases infiltration through cracks and leaks, making them easier to detect. You can use incense sticks or your damp hand to locate these leaks. If you use incense sticks, moving air will cause the smoke to waver, and if you use your damp hand, any drafts will feel cool to your hand.
On the outside of your house, inspect all areas where two different building materials meet, including:
* All exterior corners
* Where siding and chimneys meet
Professional Home Energy Audits
Professional energy audits generally go into great detail. The energy auditor should do a room-by-room examination of the residence, as well as a thorough examination of past utility bills.
Many professional energy audits will include a blower door test. Most will also include a thermographic scan.
Preparing for an Energy Audit
Before the energy auditor visits your house, make a list of any existing problems such as condensation and uncomfortable or drafty rooms. Have copies or a summary of the home’s yearly energy bills. (Your utility can get these for you.) Auditors use this information to establish what to look for during the audit. The auditor first examines the outside of the home to determine the size of the house and its features (i.e., wall area, number and size of windows). The auditor then will analyze the residents’ behavior:
* Is anyone home during working hours?
* What is the average thermostat setting for summer and winter?
* How many people live here?
* Is every room in use?
Your answers may help uncover some simple ways to reduce your household’s energy consumption. Walk through your home with the auditors as they work, and ask questions. They may use equipment to detect sources of energy loss, such as blower doors, infrared cameras, furnace efficiency meters, and surface thermometers.
Selecting an Energy Auditor
To have a valid <a rel=”nofollow” onclick=”javascript:pageTracker._trackPageview(‘/outgoing/article_exit_link’);” href=http://www.techstore.ie/Renewable-Energy/Home-Energy-Efficiency/Home-Energy-Audits.htm>home energy audit </a> you need to have a certified auditor inspect your house.
Related posts: